40mm Electric
Pruning Shears
A comparison of two COCHUMS platforms with a confirmed 4.0 cm cutting capacity.
CPS-09 and CPS-10.
The current catalogue confirms both CPS-09 and CPS-10 at 4.0 cm. They are separate product platforms with different documented internal configurations. CPS-09 lists a 30 motor, J40 blade, 11-tooth gear, X11 controller and integrated display. CPS-10 lists a 40 motor, 12-tooth gear, X9 controller, semi-steel gear and integrated display.
These component differences are presented for accurate comparison. They are not used to infer unverified cutting speed, battery endurance or field performance.
Choose from verified information.
Confirm the exact model rather than ordering against a capacity label alone.
| Model | Capacity | Motor | Blade | Gear | Controller | Display |
|---|---|---|---|---|---|---|
| CPS-09 | 4.0 cm | 30 motor | J40 blade | 11-tooth | X11 | Integrated |
| CPS-10 | 4.0 cm | 40 motor | Not confirmed | 12-tooth, semi-steel | X9 | Integrated |
Application Fit
Check that the confirmed capacity is relevant to the target branch diameter and pruning requirement. Validate the selected model in representative conditions.
Configuration Identity
Use the model number and documented components together. Do not assume that two 4.0 cm products have the same internal design.
Portfolio Planning
Compare the two platforms with CPS-08 at 3.0 cm and the smaller series when planning a tiered distributor range.
Private Label Scope
Discuss branding and packaging after the technical model has been selected and recorded.
Keep the two 40 mm platforms distinct.
A buyer should select CPS-09 or CPS-10 by model and documented configuration, not by capacity alone. Each sample should be traceable to its motor, controller and gear information. If both models are evaluated, maintain separate review notes and do not transfer observations from one platform to the other.
The product sample can be used to assess format, controls, display arrangement and suitability for the buyer’s intended workflow. Broader performance, endurance or durability claims require an agreed evaluation method and should not be inferred from the motor or gear labels.
For private-label work, confirm the chosen model before creating packaging. Product images and verified specifications must correspond to that platform. Branding, colour and packaging presentation can then be reviewed through the COCHUMS OEM process without obscuring the technical choice.
40mm Electric Pruning Shears FAQ
Which COCHUMS models are confirmed at 40 mm?
CPS-09 and CPS-10 are both confirmed at 4.0 cm.
Do CPS-09 and CPS-10 use the same configuration?
No. Their documented motors, controllers and gear arrangements differ.
Does this comparison claim one model performs better?
No. It presents confirmed component information only. Buyers should validate the selected model for their application.
Is OEM support available?
Yes. Product selection, branding and packaging presentation can be discussed through the OEM/ODM programme.
Compare CPS-09 and CPS-10.
Request verified configuration information for your market.